Composite intelligent resonance pulse technology, which is the best and most advanced technology in the world on lead acid battery desulfation which can accelerate the chemical reaction in the battery without any damage or hurt on battery physical structure, can restore vitality on the verge of scrapped battery, and prolong its life
There is around four method on battery regeneration since lead acid battery invented
(1) Adding Activator
Since 2nd World War , The additives of Cobalt, Manganese and other substances was commonly used during the 2nd World War on submarine batteries. The result is a
release of the superficial sulfate build-up. The acid level is elevated to normal and the battery capacity somewhat increases. This effect occurs depending on the
degree of sulfation and age of the battery after a short period of time. In addition, a contaminant remains in the electrolyte. Structural damage to the surface is not
fixed and could even increase. Furthermore, the hard sulfate crystals do not dissolve completely, and they can cause further contamination and degradation of the
battery. In the long term, Silver and/or Cobalt compounds cause irreversible damage to the battery.
(2) Large Current charge or Negative Pulse charge , use large current with high energy to removal & activate lead acid crystal & sulfuration Adding negative pulse when charge , which can reducing the temperature rise. has a very few effection to remove battery sulfuation , Furthermore , both of method would damage positive plate ,shorten battery life
(3) High Frequency Pluse method . this method is a big step and improvement on lead acid battery regeneration , it can remove almost all of battery desulfation also without physical damage to battery .
(4) Composite Resonant Pulse method . this is my solution . which is based on High Frequency Plus method . but a big improvement is made . a composite resonant plus is gave to battery. can break variety size of lead sulfate crystals can be breakdown at same time . it is better softer and more effective than High frequency Plus method . so my machine can save get better result but save regeneration cost . it is the best and most advanced method on battery regeneration
